Skip to main content

RC jeet plane

 Rc jeet plane

NRF24 2.5GHz data transmission speed. BLDC motor 1000kV max Load 15Amp.

Transmitter or Receiver 

Make transmitter or Receiver previous post check now. Transmitter make just ₹250/- . Transmitter making components NRF24 with antenna module, atmega8A Microcontroller, X-Y axis module with Tap-switch, 3 way-switch, 16.00MHz crystal and 3.3V regulator IC.

  Receiver also use NRF24 without antenna module, atmega 328P, 16.00MHz crystal and 3.3V regulator IC.


Plane Motor ESC

Motor 1000kV brushless DC motor use 10 Inches Propeller or electronic speed controller 30A . 

Microcontroller

Atmega8A 40Pin IC 8KB of programmable memory speed 16MHz 6 PWM pins 23 I/O pins 8bit processor 1KB SRAM, 512 Bytes EEPROM.

Atmega 328P 40Pin IC 32KB of programmable memory speed 16MHz 6 PWM pins and 23 I/O pins 8bit processor.

 

Comments

Popular posts from this blog

FM transmitter using crystal

FM transmitter using crystal   Power supply   :-   Using power supply stable DC voltage 2 V to 3.7 V max. You can only use battery because battery is perfect for this circuit battery output doesn't any noise. Components  :-  Transistor BC 547 , Resistance 100 ohm, 4.7K ohm.   Capacitor 1nF, 47pF,              22pF.   Inductor 1uH. Condenser mic any .       Resistance  :-   Using resistance 100 ohm +-5% changing 1/3 watt, 4.7 K ohm +-5% changing 1/3 watt. Video link -  https://youtu.be/aV7K2NHrHTM 3 Volt Circuit Diagram Capacitor  :-   1uF this capacitor positive pin connect 4.7K ohm resistance one pin and another pin connect 2K ohm resistance one number pin. 5 Volt Circuit Diagram This Circuit Transmitter range 0.3 Kilometre (300 Metre) to 0.5 kilometre (500 Metre) without any obstacle otherwise range 0.2 Kilometre (200 metre) anywhere. It's a spy device. D...

Fm transmitter circuit

Fm transmitter circuit Power supply   :-   Using power supply stable DC voltage 2 V to 3.7 V max. You can only use battery because battery is perfect for this circuit battery output doesn't any noise. Components  :- Transistor BC 547 , Resistance 100 ohm , 4.7 K ohm .   Capacitor 1nF, 47pF, 22pF.   Inductor 1uH. Condenser mic any . Resistance  :-   Using resistance 100 ohm +-5% changing 1/3 watt, 4.7 K ohm +-5% changing 1/3 watt. Capacitor  :-   1nF this capacitor number 102 non-polar, 22pF this capacitor number 22 non-polar, 47pF this capacitor number 47 non-polar. Inductor  :-   This part important part for any transmitter circuit, 1uH 5Turn 24SWG. Transistor  :-   BC 547  is an NPN Bipolar junction transistor. It is commonly  used  to amplify current. A small current at its base controls a larger current at collector & emitter terminals.  It has a transition...

US names six crew killed in refuelling plane crash in Iraq

Latest News Update The aircraft was on a combat mission as part of ongoing US operations against Iran when it crashed in western Iraq on Thursday. The aircraft was on a combat mission as part of ongoing US operations against Iran when it crashed in western Iraq on Thursday. In-Depth Context: Aerial refueling Aerial refuelling, also referred to as air refuelling, in-flight refuelling (IFR), air-to-air refuelling (AAR), and tanking, is the process of transferring aviation fuel from one aircraft (the tanker) to another (the receiver) while both aircraft are in flight. The two main refuelling systems are probe-and-drogue, which is simpler to adapt to existing aircraft and the flying boom, which offers faster fuel transfer, but requires a dedicated boom operator station. The procedure allows the receiving aircraft to remain airborne longer, extending its range or loiter time. A series of air refuelling can give range limited only by crew's physiological needs (l...